30*100m /33*100m Roll DTF Printer Inkjet Heat Transfer PET film for T Shirt Clothing Transfer High Quality DTF Printing On T-shirt

HOW TO USE

Step 1: Install the EPSONL1800 printer driver

Before installation, you need to use a data cable to connect the printer and the computer. RIP software installation and settings:
Printer selection: Stylus Photo1390/1400: Ink
Channel selection: YKWWMC
White Layer Generation choice: Spot Color


Step 2: Print

(Be careful not to contaminate the printing surface)
Import pictures in the software, and adjust the pictures as needed

Check Print Color First, COLOR+WHITE; click to print

Step 3: Cover hot melt adhesive powder

After printing, try to keep it as flat as possible when taking out the printed sheet

(You can pour a proper amount of hot glue powder into the tray, and take the print piece and sow the hot melt glue powder from the bottom: the surface of the print piece should stick to the hot melt glue powder as evenly as possible, and you can gently shake off the excess hot melt glue powder) The temperature setting of the heat press machine is preheated to 110-160 degrees;

Step 4: Transfer

Take out the bearing material to preheat, remove moisture and wrinkles; then cover the printing sheet on the bearing area for transfer;
Temperature: 110-160 degrees; time: 8-12 seconds
After the T-shirt cools down, uncover the printed sheet and the transfer is completed