How To Use or Change the White ink of other brand ? A Small Trick from ACHI A3 UV DTF Printer

If want to change other brand white ink , Below operation of ACHI A3 UV DTF Printer need to be done
Firstly, when using new white ink, it need to empty the previous white ink bottle, clear the white ink sac, and then add new white ink
After add new white ink , you also need to extract ink sac 5ml again to remove bubble, clean printer head and print nozzle status diagram of ACHI A3 UV DTF Printer.

When use new white ink in future, no need to empty ink agian in future when add new same ink .
Meanwhile , There is a small trick from ACHI A3 UV DTF Printer to determine if the ink is drained or if the ink is mixed
after add a little new white ink (empty the white ink from ink bottle and ink sac firstly), shake the ink bottle several times Up and down and left and right by hand
Then Wait a few minutes , pour ink into the glass to check carefully if there are any solid particles.
If find solid particles, repeat empty white ink operation to test again .

If no solid particles, it can extract white ink form ink sac and waste ink tube , Then nozzle check.
At last print test of ACHI A3 UV DTF Printer.
https://achiuvdtfprinter.com/collections/uv-dtf-printer/products/double-side-print-13-a3-size-2-in-1-dual-upated-xp600-head-heads-uv-dtf-laminating-printer-printing-machine
-
Posted in
UV DTF printer