PRODUCT DETAILS
A3 DTF printing inkjet heat transfer PET film
Application: chemical fiber, polyester, cotton
Applicable ink: paint ink, textile ink, white ink/color ink
Applicable printer : Epson L1800, 805, 800...
Epson DX4/DX5/DX7/5113/4720 print head printer
Epson; Roland, Mutoh, Mimaki and other wide format inkjet printers
HOW TO USE
Step 1: Install the EPSONL1800 printer driver
Before installation, you need to use a data cable to connect the printer and the computer. RIP software installation and settings:
Printer selection: Stylus Photo1390/1400: Ink
Channel selection: YKWWMC
White Layer Generation choice: Spot Color
Step 2: Print
(Be careful not to contaminate the printing surface)
Import pictures in the software, and adjust the pictures as needed
Check Print Color First, COLOR+WHITE; click to print
Step 3: Cover hot melt adhesive powder
After printing, try to keep it as flat as possible when taking out the printed sheet
(You can pour a proper amount of hot glue powder into the tray, and take the print piece and sow the hot melt glue powder from the bottom: the surface of the print piece should stick to the hot melt glue powder as evenly as possible, and you can gently shake off the excess hot melt glue powder) The temperature setting of the heat press machine is preheated to 110-160 degrees;
Step 4: Transfer
Take out the bearing material to preheat, remove moisture and wrinkles; then cover the printing sheet on the bearing area for transfer;
Temperature: 110-160 degrees; time: 8-12 seconds
After the T-shirt cools down, uncover the printed sheet and the transfer is completed
